If you have a Linksys Wireles Router and if you need to get logged into the Router. Please follow these steps and this will help guide you.

1. Open a web browser (Internet Explorer, Safari, Firefox, Etc.)
2. At the Http:// address bar you will want to type in "http://192.168.1.1" then press "Enter". If you do not know please look at the picture below to see what the address bar looks like. It can found typically at the top of the internet browser window.
   
   
3. You will get prompted to type in a "User name and Password". At this window you will want to leave the user name  field blank. and type in "admin" for the password and press "Ok" or "Enter"
   
4. Click on the top tab that says "Wireless"
5. Then Click on the link that says "Wireless Security" which is located just under the Wireless Tab
6. You want to select which wireless security you want to use. We recommend using WPA2-PERSONAL. (note: WPA+WPA2 will not work with the Livio Products. Some older routers may not be able use WPA2.)
7. You want to verify that the Encryption is AES only. (note: if you have TKIP selected it will not work. AES has be selected for WPA2.)
   
8. Click "Save Settings" located at the bottom of the page.

• When making any wireless adjustments you will be required to reboot all computers, and wireless compatible equipment. Some devices may have to be reconnected to your wireless network.
  

 For step by instructions from Linksys's website please click this link.

http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articlei...